Certtree Microsoft MCSA 70-741 training exam material

CertTree will provide you with the most updates 70-741 Networking with Windows Server 2016 training exam to prepare for the tests, all the 70-741 Networking with Windows Server 2016 training exam are available at the site. Studying with 70-741 Networking with Windows Server 2016 training exam makes it much easier to pass the certification. These 70-741 Networking with Windows Server 2016 training exam cover all the exam objectives and have been checked for their accuracy, thereby, assuring you success in your certification exam.


CertTree is website that can take you access to the road of success. CertTree can provide the quickly passing 70-741 Networking with Windows Server 2016 training exam for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Microsoft certification 70-741 exam for only one-time.CertTree is a website that provide the counseling courses for IT professionals to participate in Microsoft certification 70-741 exam and help them get the Microsoft 70-741 certification.

Share some MCSA 70-741 exam questions and answers below.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)



Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?
A. Yes
B. No
Answer: B


Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.



You have the following subnets defined on Server1.



You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies.
Does this meet the goal?
A. Yes
B. No
Answer: B


You have a DHCP server named Server1 that runs Windows Server 2016.
You have a single IP subnet.
Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits.
You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits.
What should you do?
A. Create a second scope, and then create a superscope.
B. Create a superscope, and then configure an exclusion range in Scope1.
C. Create a new scope, and then modify the IPv4 bindings.
D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.
Answer: A

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.
Does this meet the goal?
A. Yes
B. No
Answer: B


The 70-741 Networking with Windows Server 2016 training exam of CertTree is developed by experienced experts' extensive experience and expertise and the quality is very good and have a very fast update rate. Besides, exercises we provide are very close to the real exam questions, almost the same. When you select CertTree, you are sure to 100% pass your first time to participate in the difficult and critical Microsoft certification 70-741 exam.

CertTree 70-741 Networking with Windows Server 2016 training exam is the best training materials. If you are an IT staff, it will be your indispensable training materials. Do not take your future betting on tomorrow. CertTree 70-741 Networking with Windows Server 2016 training exam are absolutely trustworthy. We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam. To get the Microsoft 70-741 exam certification is the goal of many IT people & Network professionals. The pass rate of CertTree is incredibly high. We are committed to your success.